Table of Contents
Advertisement
This section describes the method to check the connection between the 78K0 MINICUBE and self-check board
(accessory), using the OCD Checker.
7.1
Execution of OCD Check
Be sure to terminate the debugger before executing the OCD Checker.
Perform the connection check according to the following steps (1) to (4).
(1) Connection
Connect the 78K0 MINICUBE to the self-check board in accordance with the 78K0 MINICUBE user's manual.
(2) Setting the OCD Checker
Refer to 2.3 Explanation of Each Area.
• Emulator mode select area:
• Clock select area:
• Internal ROM Security setting area:
• [Log file] button:
(3) Click the [Test] button. If an error occurs during checking, refer to 7.3 Error Output and 7.4 Action for
Error.
(3)
38
CHAPTER 7 OCD CHECK FOR 78K0 MINICUBE
Select "78K0 MINICUBE".
Select "internal" or "socket".
Input the ID code.
Specify the log file name and the location for saving the log file.
User's Manual U18591EJ2V0UM
(2)
Advertisement
Table of Contents
