schmersal PSC1 Series Installation Manual page 3

Installation manual
Installation instructions for devices
- PSC1-C-10
- PSC1-C-10-MC (1)
- PSC1-C-10-FBx
(2)
- PSC1-C-10-SDM1
- PSC1-C-10-SDM1-MC
- PSC1-C-10-SDM1-FBx
- PSC1-C-10
- PSC1-C-10-SDM2-MC
- PSC1-C-10-SDM2-FBx
in series PSC-C-10 and their expansion modules
- PSC1-E-31-12DI-10DIO
- PSC1-E-33-12DI-6DIO-4RO
- PSC1-E-37-14DI-4DO-2RO-RIO
(1)
Memory card for storing the configuration, the program and the data; see:
(2) Different options, see: "Optional universal communication interface"
Note:
The German version is the original version of the installation instructions
As of: 04/2016
Valid from firmware release 5.0.0.1
Subject to technical change without notice.
The content of our documentation has been prepared with the greatest possible care and corresponds
to the latest information available to us.
Nevertheless, we draw your attention to that fact that this document cannot always be updated
simultaneously
to the technical further development of our products.
Information and specifications may be changed at any time. Please obtain information on the
latest version at: www.schmersal.net.
Devices manufactured by
K. A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
HB-37350-810-01-38F-DE PSC1-C-10 Installation manual V1.1.docx
Version: 38F
(1)
(2)
(1)
(2)
Page 3 of 177