schmersal PSC1 Series Installation Manual page 176

Installation manual
Start / reset element
Switch type Remark
1 normally open Simple alarm reset (edge
contact evaluation)
1 normally open Simple logic reset
contact
1 normally open Simple start monitoring
contact (special function)
Note:
The alarm reset input can be operated with a continuous voltage of 24 V and is edge controlled.
HB-37350-810-01-38F-DE PSC1-C-10 Installation manual V1.1.docx
Version: 38F
Category
categorisation
--
PL d
--
SIL categorisation
--
SIL 2
--
Page 176 of 177