schmersal PSC1 Series Installation Manual page 22

Installation manual
Tech. characteristic data PSC1-C-10-SDM1 (-FBx
Safety-related characteristic data
General data
Electrical data
Environmental data
Mechanical data
(*) Maximum 2 encoders / axis
(**) pn/pp can be configured via SafePLC2
(1) For version see: "Optional universal communication interface"
HB-37350-810-01-38F-DE PSC1-C-10 Installation manual V1.1.docx
Version: 38F
PL according to EN 13849
PFH / architecture
SIL according to EN 61508
Proof test interval
Max. number of expansion modules
Interface for expansion modules
Number of safe digital inputs
Number of safe digital outputs
pn switching
pp switching
Number of safe digital I/O
Number of relay outputs
Number of safe analogue inputs
Number of signal outputs
Number of pulse outputs
Type of connection
Axis monitoring
Encoder interfaces
(D-Sub / screw terminals)
Encoder technology
(See table Encoder
specifications)
Supply voltage / protection
A1.1
A1.2
Tolerance
Power consumption
(logic)
A1.1
A1.2
Rated data digital inputs
Rated data digital outputs
pn switching
pp switching
Rated data relay
Rated data analogue inputs
Rated data pulse outputs
Rated data signal outputs
Temperature
Degree of protection
Climatic class
EMC
Size
(HxDxW [mm])
Weight
Attachment
Number of T-bus
PSC1-C-10-SDM1
PSC1-C-10-SDM1
(-FBx (1) )
Max. connection cross-section
(1) )
PL e
6,3 * 10 -9
+
1-channel per Relay 1 * 10
2-channel per Relay 5 * 10
SIL 3
20 years = max. service life
2
T-bus connector, can be plugged into DIN rail
14 (OSSD support)
2
4
-
2
-
2
2
Removable screw terminals
1
1 / 2 (*)
SSI, SinCos, TTL, Proximity Switches
24 VDC/ 2 A
24 VDC/ 10A
-15%, +20%
2.4 W
< 48 W
< 240 W
24 VDC; 20 mA, type 1 according to EN61131-2
24 VDC; 2 A
24 VDC; 2 A
24 VDC/2 A (DC13)
230 VAC/2 A (AC15)
-
Max. 250 mA
24 VDC, 250 mA
0° to 50° operating temp.;
-25° to +70 ° storage temp.
IP 20
3k3 according to DIN 60 721
Corresponding to EN 55011 and EN 61000-6-2
PSC1-C-10-SDM1
PSC1-C-10-SDM1 (-FBx
PSC1-C-10-SDM1
PSC1-C-10-SDM1 (-FBx
Can be snapped to DIN rail
2
3
1.5 mm²
/ KAT 4
-8
-10
= 100x115x45
(1) ) = 100x115x67.5
= 310 g
(1) ) = 410 g
Page 22 of 177