Sump Gasket - Haier GE GDF510P M0 Series Technical Service Manual

14. Disconnect the circulation pump wiring, drain
15. The sump is now free to remove.
NOTE: A Clamp Kit (Part #: WD35X10382) can
be used to replace any or all clamps on the
sump assembly. The three hoses located on
the sump are not available as individual parts.
the circulation pump. The hose between the
circulation pump and diverter is molded to the
diverter. The hose connecting the sump to the
drain pump has the hose molded to the drain
pump.

Sump Gasket

Stressing or softening the gasket ribs (see below)
will make a new gasket seat easier. Lubricating
with a small amount of rinse agent or water will
also ease installation.
screwdriver inserted into the ear of the clamp
and move the handle back and forth to loosen
the clamp. The clamp can be removed and
discarded when the component is removed.
: Using diagonal pliers to cut clamps
may cause damage to hoses.
– 40 –
: Use a small