Sump Module - Haier GE GDF510P M0 Series Technical Service Manual

4. Remove the 1/4-inch screw holding the strike
(a Phillips-head screw will come with the
service part for easier installation).
Strike
5. Hybrid or SS inner door models have a
feature molded in the top attachment strip
which secures the strike to the door.
Door Strike
Attachment Strip
Mounting Screw
Stainless steel inner door models have a cross
brace connecting the hinge receivers. This brace
acts as a door stiffener.
Friction Pads
Hinge Receivers
1/4-inch hex-
head screw
Cross Brace
– 38 –

Sump Module

The sump module is front serviceable with the
dishwasher remaining in the installed location.
This section of the guide only covers the sump
removal. Components and diagnostics of the
sump module may be found in the Fill System,
Circulate System or Drain System sections of
this guide.
Sump Module Removal
1. Remove power to the dishwasher.
2. Remove the upper and lower racks.
3. Remove the toe kick.
4. Remove the door (see Door Removal in this
section of the service guide).
5. Remove the lower spray arm (turn the locking
nut counter-clockwise).
6.
7. Remove the main conduit (see the
Circulation System section of this service
guide).
(Continued next page)