Hinge; Tub Gasket - Haier GE GDF510P M0 Series Technical Service Manual

The hinge system is comprised of offset legs
(part of the tub and structure system and not a
replaceable part), hinge arms, and receivers.
The hinge system allows the door to be removed
while the dishwasher remains installed.
Information on door removal can be found under
the Door section found later in this section of the
service guide.
Receiver
Hinge Arm
Offset Leg
– 21 –

Tub Gasket

Tub Gasket
The Tub Gasket seals the top and sides of the
tub to the door. The retainer is molded into the
PermaTuf Tub. The seal pushes into the retainer
area of the tub, and no sealant or RTV is used to
install the tub gasket. There is a stop molded into
the tub to provide a proper position end point for
the gasket.
Tub
Gasket
Tub
Gasket
Track
Tub
Gasket
Stop
To Remove: Pull the gasket from the retainer
area.
(Continued next page)