Ui (User Interface); Front Control Ui, Light Pipe And Buttons - Haier GE GDF510P M0 Series Technical Service Manual

Exploded view of console, button tree and UI
assembly.
Appearances may vary depending on model
number throughout this service guide.
Light Pipe
The front control console must be removed and
separated to access the UI, light pipe and buttons.
UI Removal
1. Remove four 1/4-inch hex-head screws at the
bottom of the UI Board and cover.
Four 1/4 in. hex-
2. Tip the bottom of the UI to release from top
tabs.
Front Console
UI
3. To remove the light pipe assembly, remove
four 1/4-inch hex-head screws at the top of
the light pipe.
4. The light pipe and buttons may now be
removed.
– 31 –
Vent
UI
Conduit
UI
head screws
Light Pipe Assembly