Safety Requirements - Haier GE GDF510P M0 Series Technical Service Manual

GE Factory Service Employees are required to use safety glasses with side shields, safety gloves and
steel toe shoes for all repairs.
Brazing Glasses
Dyneema®Cut Resistant
Glove
Prior to disassembly of the dishwasher to access components, GE
Factory Service technicians are REQUIRED to follow the Lockout /
Step 1
Plan and Prepare
Step 2
Shut down the appliance
Step 3
Isolate the appliance

Safety Requirements

Plano Type Safety Glasses
Cut Resistant Sleeve(s)
Steel Toed Work Boot
Tagout (LOTO) 6 Step Process:
Step 4
Apply LOTO device and lock
Step 5
Control (discharge) stored
energy
Step 6
"Try It" verify that the appliance
is locked out
– 7 –
Prescription Safety Glasses
Safety Glasses must be
ANSI Z87.1-2003 compliant
Electrically Rated Glove and
Dyneema® Cut Resistant Glove
Keeper