DFI RC300-CS User Manual page 49

Chipset
This section configures relevant chipset functions.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Main Advanced
Chipset Security
Graphics Configuration

PEG Port Configuration

PCH-IO Configuration

Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Graphics Configuration
This section is used to configure the Network Stack settings.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Chipset
Graphics Configuration
[Auto]
Primary Display
[Auto]
Internal Graphics
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Primary Display
Select a Graphics device to be the primary display — Auto, IGFX, SG
Please choose SG for MXM vendor applications. (Switchable Graphics =
Optimus)
Internal Graphics
Keep IGFX enabled based on the setup options.
RC300-CS
Boot Save & Exit
Graphics Configuration
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Initial priority :
AUTO: PEG->PCIe->PCI-
>IGFX
IGFX: IGFX->PEG-
>PCIe->PCI
PEG: PEG->PCIe->PCI-
>IGFX
PCI: PCI->PCIe->PEG-
>IFGX
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
PEG Port Configuration
Configure the internal MXM3.1-B.
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Chipset
PEG Port Configuration
MXM3.1-B
Enable Root Port
Max Link Speed
► PEG Port Feature Configuration
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
Enable Root Port
Enable or disable the root port.
Max Link Speed
Configure Max Link Speed: Auto, Gen1, Gen2 or Gen3.
49
Enable or Disable the
Root Port
x16
[Enabled]
[Auto]
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi.com