Table of Contents
Advertisement
Safety Precautions
• Use the correct DC input voltage range.
• Unplug the power cord before removing the system chassis cover for installation or servic-
ing. After installation or servicing, cover the system chassis before plugging the power cord.
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend by the manufacturer.
• Dispose of used batteries according to local ordinance.
• Keep this system away from humidity.
• Place the system on a stable surface. Dropping it or letting it fall may cause damage.
• The openings on the system are for air ventilation to protect the system from overheating.
DO NOT COVER THE OPENINGS.
• Place the power cord in such a way that it will not be stepped on. Do not place anything on
top of the power cord. Use a power cord that has been approved for use with the system
and that it matches the voltage and current marked on the system's electrical range label.
• If the system will not be used for a long time, disconnect it from the power source to avoid
damage by transient overvoltage.
• If one of the following occurs, consult a service personnel:
- The power cord or plug is damaged.
- Liquid has penetrated the system.
- The system has been exposed to moisture.
- The system is not working properly.
- The system dropped or is damaged.
- The system has obvious signs of breakage.
• The unit uses a three-wire ground cable which is equipped with a third pin to ground the
unit and prevent electric shock. Do not defeat the purpose of this pin. If your outlet does
not support this kind of plug, contact your electrician to replace the outlet.
• Disconnect the system from the DC outlet before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
RC300-CS
About the Package
The package contains the following items. If any of these items are missing or damaged,
please contact your dealer or sales representative for assistance.
• 1 RC300-CS system unit
• 1 Counter Part Power connector
• 1 Wall-mount bracket
Optional Items
Optional
Part Number
Items
2.5" SSD
"785-S251TBG
785-S25512G
785-S25256G
785-S25128G"
M.2 SATA
785-M2SATA64G
SSD
M.2 SATA
785-M2SATA128G
SSD
M.2 SATA
785-M2SATA256G
SSD
M.2 SATA
785-M2SATA512G
SSD
Memory
138-580004-104G
Memory
138-540002-121G
WiFi/BT
module
761-AP1235-000G
kit
LTE
module
761-RC3000-001G
kit
5G
module
761-RC3000-100G
kit
M12
A81-005038-054G
Cable
CAN bus
770-MPE21-100G
module
5
Description
"2.5"" SATA SSD, 1TB MLC, -40 to 85°C, RoHS
2.5"" SATA SSD, 512GB MLC, -40 to 85°C, RoHS
2.5"" SATA SSD, 256GB MLC, -40 to 85°C, RoHS
2.5"" SATA SSD, 128GB MLC, -40 to 85°C, RoH"
64GB, M.2 2280 SSD, SATA3 B+M Key, MLC, Wide
Temp.
128GB, M.2 2280 SSD, SATA3 B+M Key, MLC, Wide
Temp.
256GB, M.2 2280 SSD, SATA3 B+M Key, MLC, Wide
Temp.
512GB, M.2 2280 SSD, SATA3 B+M Key, 3D TLC, PE:
3K, 30u" -20~75℃
8GB DDR4 2666Mhz SO-DIMM 1Rx8 IND 1Gx8 CL19
1.2V
4GB DDR4 2666Mhz SO-DIMM, '-40 to 85C
WiFi/Bluetooth Module AP12356, antenna *2, 200mm
SMA cables*2, Mini PCIe Bracket, screws
Quectel EG25GGB CAT4 miniPCIe module, antenna*2,
300mm SMA cables*2
SIM8202G-M2 M.2 module, antenna*4, 184mm SMA
cables *4
8-pin M12 X-coded to RJ45 PoE cable
MPE-CAN2 MiniPCIe Full CAN Module Card Asssembly
www.dfi.com
Advertisement
Table of Contents
