DFI RC300-CS User Manual page 52

► SATA and RST Configuration
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Chipset
SATA And RST Configuration
SATA Controller(s) [Enabled]
SATA Speed [Auto]
SATA Mode Selection [AHCI]
M.2-M Empty
Port 1 [Enabled]
Hot Plug [Disabled]
SATA0(R2) Empty
Port 2 [Enabled]
Hot Plug [Disabled]
SATA1(R3) Empty
Port 3 [Enabled]
Hot Plug [Disabled]
SATA2(R4) Empty
Port 4 [Enabled]
Hot Plug [Disabled]
SATA3(R5) Empty
Port 5 [Enabled]
Hot Plug [Disabled]
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
SATA Controller(s)
Enable or disable the Serial ATA controller. When theis field is enabled, the fol-
lowing fields will appear.
SATA Speed
Select the speed of the Serial ATA controller: Auto, Gen1, Gen 2 or Gen3.
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI This option allows the Serial ATA controller(s) to use AHCI (Advanced
Host Controller Interface).
Intel RST Premium With Intel Optane System Acceleration
This option allows you to create RAID or Intel Rapid Storage configuration with
Intel Optane ™ system acceleration on Serial ATA devices.
®
Use RST Legacy OROM
This field is only available when SATA Mode Selection is set to "Intel RST Pre-
mium With Optane System Acceleration." It is used to enable or disable to use
RST Legacy OROM.
Serial ATA Ports
Enable or disable the Serial ATA port and its hot plug function.
RC300-CS
► HD Audio Configuration
Enable/Disable SATA
Device.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
52
Aptio Setup Utility - Copyright (C) 2021 American Megatrends, Inc.
Chipset
HD Audio Subsystem Configuration Settings
HD Audio [Enabled]
Version 2.20.1275. Copyright (C) 2021 American Megatrends, Inc.
HD Audio
Control the detection of the HD Audio device.
Disabled HDA will be unconditionally disabled.
Enabled HDA will be unconditionally enabled.
Control Detection of the
HD-Audio device.
Disabled = HDA will be
unconditionally disabled
Enabled = HDA will be
unconditionally enabled.
Select Screen
→←:
Select Item
↑↓:
Enter: Select
+/ - : Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
www.dfi.com