Receiving A Voice Call - NEC e808y Product Manual

Operation
Making a call from
Calls Made number
list
Making a call from
Calls Received
number list
Quick Recall
Pause Dial

Receiving a Voice Call

When a voice call is made to your 3 number, the ringtune, the illumination and the vibrate function will be
activated (activation depends on the settings). When Calling Line Identification (CLI) function has been
activated by the caller, the caller's phone number will be displayed. If the calling party opts to hide their phone
number, e808 will generate a message indicating that the phone number has been withheld.
The following shows the call received display images depending on the contact entry status:
Contact picture
exists
Making and Receiving Calls
Procedure
Press the Right key to display Calls Made.
Select the phone number.
Press the Start key to dial the phone number.
Press the Left key to display Calls Received.
Select the phone number.
Press the Start key to dial the phone number.
Input the memory number (3 digits max.) and press the # key.
The contact list memory will be displayed.
Press the Start key to dial the phone number.
Input the phone number, then press and hold # to insert a pause
(displayed as p). Input the numbers to dial, inserting pauses
where necessary. Press the Start key to dial the phone number.
When the other party answers the call, press the SK1 (Deliver)
key to dial the numbers before the next pause. Keep pressing the
SK1 key until all the required numbers are dialed.
Registered on contact list
-15-
Not registered
on contact list