Receiving A Voice Call; To Receive A Call - NEC e616 User Manual

Receiving a Voice Call

When a voice call is made to your 3 number, the ringtune, the illumination and the vibrate function will be
activated (activation depends on the settings). When Calling Line Identification (CLI) function has been
activated by the caller, the caller's phone number will be displayed. If the calling party opts to hide their
phone number, e616 will show a message indicating that the phone number has been withheld.
Basic Operations
The basic operations for receiving a voice call are shown below:

To Receive a Call

To
1 Answer the call
2 Talk
3 End the call
Useful Tips
Useful tips for receiving a call are shown below:
Operation
Turning off the
ringtune
Making and Receiving Calls
Do This
Press the Start key or SK1 (Answer) key.
Note : When Any key answer function is activated, you can
press any key except the SK2 (Ignore) key, End key,
Triangle key and the Options menu key to answer the
call. Refer to Call options on page 134 for details.
Note : When the headset is connected, pressing the headset
switch will also answer the call.
Press the End key, or fold to close the handset.
The call is disconnected, and the call time duration is
displayed.
Note : When the headset is connected, closing the handset will
not end the call.
Procedure
You can mute the ringtune by setting the active handset profile's
Ringtune volume to Silent. Refer to Handset profile on page
136.
-18-