Receiving A Voice Call; To Receive A Call - NEC e228 Product Manual

Receiving a Voice Call

When someone makes a voice call to your 3 number, the ringtune, the illumination and the vibrate function are activated
depending on your settings. When the Calling Line Identification (CLI) function has been activated by the caller, the caller's
phone number is displayed. If the caller opts to hide their phone number, the e228 generates a message indicating that the
phone number has been withheld.
Common Tasks

To Receive a Call

To
1 Answer the call
2 Talk
3 End the call
Useful Tips
Useful tips for receiving a call are shown below:
Task
Turning off the ringtune
Turning off the ringtune
while ringing
Rejecting a call
When you miss a call
Do This
Press the Start key or SK1 (Answer).
Note: When Any key answer function is activated, you can press any
key except the SK2 (Ignore), End key,
menu key to answer the call. Refer to Call options on page 62
for details.
Note: When the headset is connected, pressing the headset switch
also answers the call.
Press the End key.
The call is disconnected and the call time duration is displayed.
Steps
You can mute the ringtune by setting the active phone profile's Ring
volume to Silent. Refer to Handset profile on page 61.
To mute the ringtune while ringing, press the C key.
While receiving a call, press the End key or the SK2 (Ignore).
Note: Rejected calls are diverted to the number registered in Call
forwarding, If busy. This usually defaults to voicemail, depending
on the network operator.
If you miss a call, it is shown as a missed call by an icon on the Home
screen. The missed call is saved to the Missed calls list.
When you display Missed calls, the icon disappears.
-21-
and the Options
Making and Receiving Calls