Service (Sat); External Connect; Usb - NEC e808y Product Manual

Service (SAT)

(Press the "MENU" key → Select "Service (SAT)")
You can use the SAT (Subscriber Identity Module Application Toolkit) provided by 3 from Service (SAT). SAT
provides an authentication to the mobile network so you can use your rights: change personal setting
options, give a digital signature, etc. Ask 3 for details.

External Connect

(Press the "Menu" key → Select "External Connect")
You can connect e808 with a USB cable and establish a dialup connection for the PC through e808. This
function is only available in the 3G mode.
Please check that your operator allows use of your e808 as a modem to connect to the internet.

USB

Connecting e808 to a PC with an USB cable enables the PC to use e808 just like the modem to establish a
PPP connection to the Internet service provider by dialup. However, you will find that the USB connection will
provide a much faster transfer rate than a standard modem.
USB connection also enables data transfer to/from the PC. Refer to To/From PC on page 139 for details.
To Establish a Dialup Connection for a PC with an USB Cable
To
1 Connect e808 and the PC
with a USB cable.
2 Start up the external
connection function
3 Dial up
4 Disconnect
Service (SAT)
Do this
Insert the USB cable to the I/O connector of e808 and the USB HUB on the
PC.
Note : Use the USB cable attached to e808.
Note : Insert the USB cable vertically to e808 (do not insert it at an angle).
Press the MENU key and select External Connect.
Network connection standby screen is displayed.
From the PC application, start the dialup.
Disconnect from the PC application.
-57-