Writing And Sending A Message; Basic Operations; To Write And Send A New Text Message T - NEC e808y Product Manual

Writing and Sending a Message

The following describes the operations related to writing and sending a message.

Basic Operations

The basic operations for writing and sending a message are shown below:
To Write and Send a New Text Message
To
1 Start the message function
2 Display Create Msg
for Text message
3 Input the message text
4 Set the addressee
5 Send the message
Do this
Press the SK1 (Message) key, or press the MENU key and
select Message.
Select Create Message.
On the Create Msg displayed, select Text Message.
New messages is displayed.
Select Message, input the message and press the Enter key
(160 characters max.).
Select To, input the addressee's phone number and press the
Enter key.
Note : To set the addressee from the Contacts, refer to Setting
the addressee from the contact entries on page 68.
Press the SK1 (Send) key.
The message is sent and saved in the Sent Items.
-64-
Message