Useful Tips
The useful tips for the email service are shown below:
For Writing, Sending, Replying and Forwarding an Email
Operation
Setting the addressee from the
contact entries
Previewing an email before sending
Saving a finished email to send it later Press the SK2 (Submenu) key and select Send later.
Saving an unfinished and unsent
email
Attaching a header/footer
Deleting the email being edited
Setting the priority
Sending an email to more than one
addressee
Sending all pending emails at the
same time
Attaching a video, an image, an audio
file, a ringtune or other types of files
Message
Procedure
Highlight To, Cc or Bcc field, press the SK2 (Submenu) key and
select Search contacts.
Search and select the addressee's email address.
The selected email address is input in the highlighted field.
Press the SK2 (Submenu) key and select Preview message.
Press the SK2 (Submenu) key and select Save. The email is
saved in Draft.
Press the SK2 (Submenu) key and select Paste header or
Paste footer.
Press the SK2 (Submenu) key and select Delete.
Press the SK2 (Submenu) key and select Set priority.
Select from Low, Normal, and High.
Highlight To, Cc, or Bcc field, press the SK2 (Submenu) key and
select Add addressee. Select From contacts to select an email
address from the contact list, or Enter direct to directly enter the
address in the To, Cc, or Bcc field. Repeat to add more
addresses. Selecting the submenu Delete addressee deletes
the highlighted address field.
Note : If the email addresses do not contain an @ symbol, the
email may not be delivered to the destinations.
Open the Email Outbox. Press the SK2 (Submenu) key and
select Send pending Email.
Press the SK2 (Submenu) key and select Attach video, Attach
image, Attach audio, Attach ringtune, or Attach other file.
-87-