Using The Memory Operation; Memory Function Hierarchy - Siemens SIMATIC VPU200/560 Programming Manual

8.6

Using the MEMORY Operation

8-18 Entering Ladder Programs
The MEMORY operation is used to initialize the V and K memory locations
in the P/C (if Online) or the Program Disk (if Offline). The function key
which become available in this operation are shown in Figure 8-5.
Figure 8-5 Memory Function Hierarchy
The MEMORY operation is used to view and modify several memory
locations at once. When the function key is pressed the memory locations
will be displayed in numeric order. The format for each memory location will
be integer by default. Additionally, the following function keys will become
available:
SIMATIC VPU200/560 Programming Manual