Table of Contents
Advertisement
10.3
Functions Available
10-4
Programming SF I/O Modules
The directory displays up to 32 entries on each page. Use the arrow keys
and the Return key to move the cursor from entry to entry. Function keys
are available as shown and described below.
The EXIT key leaves the directory and returns the previous display.
The UP key displays the next 32 directory entries.
UP
F2
The DOWN key displays the previous 32 directory entries.
DOWN
F3
Use the arrow and Return keys to sect the entry line in the
SF Programmable Module Directory for the module data to
be displayed by pressing F4, TYPE.
The TYPE key displays a Box Type directory for editing or
TYPE
F4
creating boxes. See Figure 10-3.
Figure 10-3 Box Type Directory
The function keys available with the Box Type Directory are labeled Exit
and Display. The Exit (F1) key returns to the previous display. The Display
(F2) key displays the first box instruction for the type selected. If no boxes of
this type are programmed a box is displayed for creating an instruction
Figure 10-4). The function keys are labeled as shown and described in the
paragraphs following Figure 10-5.
SIMATIC VPU200/560 Programming Manual
Advertisement
Table of Contents
