Sf Box In Display Mode; Function Keys - Siemens SIMATIC VPU200/560 Programming Manual

SIMATIC VPU200/560 Programming Manual
Figure 10-4 SF Box in Display Mode
Figure 10-5 Function Keys
The EXIT key returns the display to the SF Box Type
EXIT
F1
Directory.
The UP key displays the next box instruction. If no further
UP
F2
instructions exist, a message to that effect is displayed.
The DOWN key displays the previous box instruction. If
DOWN
F3
none exist, a message to that effect is displayed.
The MODIFY key allows editing of the box currently
MODIFY
F4
displayed; or, if the display is an unlabeled box, a new
instruction can be programmed. The function key labels
change to accommodate the type of entry being made as
each parameter for the instruction is entered.
The DEBUG key provides for debugging of an SFBOX.
DEBUG
F5
After F5 is pressed. the function key labels are as follows:
Programming SF I/O Modules 10-5