Operations Available In The Offline Mode - Siemens SIMATIC VPU200/560 Programming Manual

Operations
Available in the
Offline Mode
SIMATIC VPU200/560 Programming Manual
In the Offline mode, the Functions keys are labeled as shown and described
below:
Pressing F1 returns the screen to the previous display. Pressing F2 scrolls
the display forward, and F3 scrolls back through previous displays.
This function key begins the series of operations which are
MODIFY:
F4
used to edit an existing program. See Section 8.3.
This function key is similar to the MODIFY function key
INSERT:
F5
and is used to add a new rung to the network. See
Section 8.3.
This function key is used to select a section of a program
BLOCK:
F6
which can then be moved, copied or deleted. See Section 8.4.
This function key begins the series of operations which are
FIND:
F7
used to locate network elements or addresses.
See Section 8.5.
This function key will begin the series of operations for
MEMORY:
F8
entering and modifying V and K memory. See Section 8.6.
Pressing the spacebar displays the following additional function keys.
Entering Ladder Programs 8-5