Table of Contents
Advertisement
3.5
Online Menus
3-8
Menu Structure of the VPU200
After selection of the Online mode, Function keys F1 – F5 appear for
entering desired baud rate. The keys are labelled as shown below:
After you select a baud rate, the Function Key labels change as follows:
Two primary operations are available with the F2 and F3 keys. The F4 key
calls another set of functions keys, which provide access to additional
operations. The two primary operations initiated by F2 and F3 are:
(CONFigure MEmory.) This begins the series of operations
CONFME
F2
which allow you to allocate the memory areas for the P/C.
(See Chapter 4 for instructions on performing this
operation.)
(CONFigure I/O.) This begins the series of operations
CONFIO
F3
which allow you to configure inputs and outputs for the 560
P/C. (See Chapter 5 for the details of this operation.)
BAUD RATE
FUNCTION KEYS
FUNCTION KEYS
SIMATIC VPU200/560 Programming Manual
Advertisement
Table of Contents
