Printing Cross-References; Accessing Print Cross-Reference; Cross-Reference Options - Siemens SIMATIC VPU200/560 Programming Manual

7.6

Printing Cross-references

Figure 7-5 shows the menu hierarchy for accessing the print cross-reference
function. While the printing operation is in progress, no other VPU
functions can be used.
Figure 7-5 Accessing Print Cross-reference
The Print Cross-reference function provides the option of listing all I/O
points (X, Y, WX, WY), control relays (C), and user word memory (K, V) used
in the ladder program. You may also request synonyms be printed with the
cross-reference listing. The memory locations are printed in numerical
sequence in the order: X, Y, C, WX, WY, K, V. Each type begins a new page.
The specified maximum value determines search range. If you do not want a
printout of all values, change the maximum listings to those desired to save
searching time.
After pressing F5 (XREF), the chart of selecting print parameters appears
for selection of column width, baud rate, lines per page and data. Upon
completion of these items, press F2 to continue. A listing of cross-reference
options then appears as shown in Figure 7-6.
Figure 7-6 Cross-reference Options
SIMATIC VPU200/560 Programming Manual Printing 7-13