Advertisement
Advertisement
Table of Contents
Related Manuals for Siemens SITRANS 7ML1930-1BK
Summary of Contents for Siemens SITRANS 7ML1930-1BK
- Page 3 Introduction Technical data Certificates and support SITRANS Radar transmitters Intrinsically Safe handheld programmer Compact Operating Instructions 7ML5830-2AH 7ML1930-1BK 05/2019 A5E32280389-AB...
- Page 4 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
-
Page 5: Table Of Contents
Table of contents Introduction ..............................4 Safety notes ..........................4 1.1.1 Security information ........................4 1.1.2 Transportation and storage ....................... 5 1.1.3 Disposal ............................ 5 Introduction ..........................6 Instructions Specific to Hazardous Area Installations ............... 6 Technical data ............................8 Battery serial number ........................ -
Page 6: Introduction
Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure... -
Page 7: Transportation And Storage
● Devices/replacement parts should be returned in their original packaging. ● If the original packaging is no longer available, ensure that all shipments are properly packaged to provide sufficient protection during transport. Siemens cannot assume liability for any costs associated with transportation damages. -
Page 8: Introduction
Siemens products. Point the programmer at the instrument’s display window and press the buttons in the required sequence. Consult individual product manuals for operation distance limits. The programmer is used with the following Siemens products: ● SITRANS LR200 ●... - Page 9 Introduction 1.3 Instructions Specific to Hazardous Area Installations 4. The equipment is certified for use in an ambient temperature range of -20 to +50 °C (-4 to +122 °F). 5. The equpiment has not been assessed as a safety related device (as referred to by Directive 2014/34/EU Annex II, clause 1.5).
-
Page 10: Technical Data
Technical data Siemens Milltronics Infrared IS (Intrinsically Safe) Handheld Programmer for hazardous and all other locations (battery is non-replaceable). Approvals FM/CSA Class I, II, III, Div. 1, Gr. A to G T6 ATEX 1 GD Ex ia op is IIC T4 Ga Ex ia op is IIIC T135°C Da... -
Page 11: Certificates And Support
In addition to our documentation, Siemens provides a comprehensive support solution at: ● Services & Support (http://www.siemens.com/automation/service&support) Personal contact If you have additional questions about the device, please contact your Siemens personal contact at: ● Partner (http://www.automation.siemens.com/partner) To find the personal contact for your product, go to "All Products and Branches" and select "Products &... -
Page 12: Index
Index Certificates, 9 Compact Operating Instructions, 9 Customer Support, (Refer to Technical support) Disposal, 5 Documentation, 9 Hotline, (Refer to Support request) Instructions and manuals, 9 Manuals, 9 Operating Instructions, 9 Service, 9 Service & Support, 9 Internet, 9 Support, 9 Support request, 9 Technical support, 9 Partner, 9...