Installing Drivers; Upgrades; Main Memory - Siemens D1107 Additional Technical Manual

Installing drivers

Insert the "Drivers & Utilities" CD.


When the DeskStart window appears, select SCENIC Pro.


Select the language in which you want to operate the user interface.


Select Operating System used.


Select - Network adapters.


Select - Intel 82559 Onboard LAN Adapter (D1107, D1106, D1132).


Go back to page after item Operating System used.


Select Updates.

Upgrades

Main memory

Support: The system needs at least one module and can manage at most three SDRAM
modules.
PC100 modules must have an SPD-EEPROM*.
It is not possible to mix SDRAM and EDO modules.
Size: From 16 Mbytes up to 768 Mbytes SDRAM
Technology: 100 MHz unbuffered DIMM modules.
168 pin, 3.3V, 100 MHz SDRAM
2M, 4M, 8M, 16M and 32M x 64 bit
2M, 4M, 8M, 16M and 32M x 72 bit (with ECC)
Granularity: For one socket 16, 32, 64, 128 or 256 Mbyte
* The EEPROM of PC100 modules contains a number of critical timing parameters and data
regarding the chip and the module vendor. Due to this the mainboard will properly recognize
the module by reading all important timing parameters specified in the EEPROM via the Serial
Presence Detect interface.
A26361-D1107-Z180-6-7619
Installing drivers
English - 17