Viewing Default Data - NEC MultiSync XG85RP-CH Setup Manual

SETTING
4 To exit the HOUR METER display, press END.
• Whenever the END button is pressed, the menus will sequence
in this order:
"ADJUST" menu Source screen
• If the "RETURN USER MODE?" menu appears, use the
CURSOR or button to select either "YES" or "NO" and
then press ENTER. This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode again,
you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode again,
you will not need to re-enter your passcode.

Viewing Default Data

The feature allows you to view the default data stored in Default Area.
To view the data, proceed as follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 68 for the explanation of the PASSCODE.
2 Use the CURSOR
or
line. Press ENTER to display the "OPTION" menu. You can also
select the "OPTION" menu directly by pressing the INPUT "8"
button.
3 Use the CURSOR
or
DATA" line. Press ENTER to display the "DEFAULT DATA"
screen. You can also select the "DEFAULT DATA" screen directly
by pressing the INPUT "7" button.
4 To complete, press the END button.
• Whenever the END button is pressed, the menus will sequence in
this order:
"OPTION" menu "ADJUST" menu
• If the "RETURN USER MODE?" menu appears, use the
CURSOR or button to select either "YES" or "NO" and
press ENTER. This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
button to highlight the "8/OPTION"
button to highlight the "7/DEFAULT
Source screen
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / K E L V I N
6 / R , G , B G A I N
7 / P A S S C O D E
8 / O P T I O N
9 / R E F . A D J U S T
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
6 / H O U R M E T E R
7 / D E F A U L T D A T A
OPTION
INPUT
H-FREQ. (KHz)
1 15 to 25
2 20 to 40
3 35 to 50
4 45 to 75
5 70 to 110
6 105 to 135
128
RETU RN USE R MO DE?
Y E S N O
-DEFAULT DATA-
REGISTERED
DEFAULT DATA
15kHz (60Hz)
NONE
48KHz (60Hz)
NONE
NONE
NONE
RETU RN USE R MO DE?
Y E S N O