Table of Contents
Advertisement
SIGNAL ENTRY
When using with two or more ISS-6020/ISS-6020G switchers:
Use the CURSOR
or
of the master Switcher and press ENTER. Then select the slot
number of the slave Switcher and press ENTER.
• The "MASTER" menu will be displayed when the slot number
of the master Switcher is selected.
• The "SLAVE" menu will be displayed when the slot number of
the slave Switcher is selected.
• Input slot numbers are from 1 through 10.
Use the CURSOR
or
"S-VIDEO" or "COMPO." and press ENTER.
• The "NAME INPUT" screen will be displayed.
Items to select
• VIDEO ---------- Selects the signal from the VIDEO input
terminal of the VIDEO input board.
• RGB ------------ Selects the signal from the RGB input terminal
of the RGB input board.
• S-VIDEO ------- Selects the signal from the S-VIDEO input
terminal of the VIDEO input board.
• COMPO. -------- Selects the signal as COMPONENT signal from
the RGB input terminal of the RGB input board.
• Go on to Step 2).
NOTE: Signal registry is not possible unless the installed input board
matches the selected signal. Check the installed input board and the
slot number.
button to select the input slot number
button to select "VIDEO", "RGB",
M A S T E R
S L O T – 0 1
S L O T – 0 2
S L O T – 0 3
S L O T – 0 4
S L O T – 0 5
S L O T – 0 6
S L O T – 0 7
S L O T – 0 8
S L O T – 0 9
S L O T – 1 0
26
S L A V E
S L O T – 0 1
S L O T – 0 2
S L O T – 0 3
S L O T – 0 4
S L O T – 0 5
S L O T – 0 6
S L O T – 0 7
S L O T – 0 8
S L O T – 0 9
S L O T – 1 0
V I D E O
R G B
S - V I D E O
C O M P O .
Advertisement
Table of Contents
