Blue Focus Tracking Setting - NEC MultiSync XG85RP-CH Setup Manual

Large screen multisync rear projection system
Table of Contents

Advertisement

SETTING

Blue Focus Tracking Setting

This feature allows you to obtain the better white uniformity by
defocusing the blue CRT.
NOTE:
• The defocus values will vary with changes in the horizontal
frequency.
• Select the "ALL WHITE" pattern using the TEST button on the full
function remote control.
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 68 for the explanation of PASSCODE.
2 Use the CURSOR
or
line. Press ENTER to display the "OPTION" menu. You can also
select the "OPTION" menu directly by pressing the INPUT "8"
button.
3 Use the CURSOR
or
MODE" line. Press ENTER to display the "SETTING MODE"
menu. You can also select the "SETTING MODE" menu directly
by pressing the INPUT "1" button.
4 Use the CURSOR
or
TRACKING" item on Page 3, then press ENTER to display the
"B-FOCUS TRACKING" menu.
NOTE: The SETTING MODE has three menus. The "B-FOCUS
TRACKING" item is on the third menu (P03). To access P03
from P01, press and hold down the CTL button then press the
button twice; to return to P01 from P03, press and hold
down the CTL button then press the
5 Use the CURSOR
or
"ON" and press ENTER.
Items to select
•OFF ...... Defocuses the blue CRT
•ON ....... Does not defocus the blue CRT
6 To end this mode, press the END button.
• Whenever the END button is pressed, the menu will sequence in
this order.
"OPTION" menu
"ADJUST" menu
• If the "RETURN USER MODE?" menu appears, use the
CURSOR
or
button to select either "YES" or "NO" and
then press ENTER. This will exit the ADJUST mode.
Items to select
• YES ...... When you try to enter the ADJUST mode the next time,
you will need to re-enter your passcode.
• NO ....... When you try to enter the ADJUST mode the next time,
you will not need to re-enter your passcode.
button to highlight the "8/OPTION"
button to highlight the "1/SETTING
button to select the "B-FOCUS
button twice.
button to select either "OFF" or
Source screen.
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / K E L V I N
6 / R , G , B G A I N
7 / P A S S C O D E
8 / O P T I O N
9 / R E F . A D J U S T
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
6 / H O U R M E T E R
7 / D E F A U L T D A T A
P03/P03
DIRECT ENTRY ACCESS
B-FOCUS TRACKING
OPTION TERM BAUD RATE
RGB/COMPONENT SEARCH
100
OPTION
– SETTING MODE –
DISABLE
OFF
9600 BPS
MANUAL
B - F O C U S T R A C K I N G
O F F
O N
RETUR N USER MOD E?
Y E S
N O

Advertisement

Table of Contents
loading

Table of Contents