Table of Contents
Advertisement
SETTING
Automatic Save Feature
This feature allows you to select two ways to store settings; auto-
matically and manually.
After "ENABLE" is selected in the AUTOMATIC DATA STORE
menu, all projector settings are stored in the projector's memory
automatically. To set the AUTOMATIC DATA STORE, proceed as
follows:
1 Press the ADJUST button to display the "ADJUST" menu.
• The projector may ask you to enter your passcode.
See page 68 for the explanation of the PASSCODE section.
2 Use the CURSOR
or
line and then press ENTER to display the "OPTION" menu. You
can also select the "OPTION" menu directly by pressing the
INPUT "8" button.
3 Use the CURSOR
or
MODE" line. Press ENTER to display the "SETTING MODE"
menu. You can also select the "SETTING MODE" menu directly
by pressing the INPUT "1" button.
4 Use the CURSOR
or
DATA STORE" item on Page 2, then press ENTER to display
the "AUTOMATIC DATA STORE" menu.
NOTE: The SETTING MODE has three menus. The "AUTOMATIC
DATA STORE" item is on the second menu (P02). To access
P02 from P01, press and hold down the CTL button then press
the
button ; to return to P01 from P02, press and hold down
the CTL button then press the
button to highlight the "8/OPTION"
button to highlight the "1/SETTING
button to select the "AUTOMATIC
button.
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / K E L V I N
6 / R , G , B G A I N
7 / P A S S C O D E
8 / O P T I O N
9 / R E F . A D J U S T
– O P T I O N –
1 / S E T T I N G M O D E
2 / M E N U M O D E
3 / S E Q U E N C E R
4 / P J A D D R E S S
5 / V E R S I O N
6 / H O U R M E T E R
7 / D E F A U L T D A T A
P02/P03
AUTO POWER ON MODE
WARM-UP MODE
AUTOMATIC DATA STORE
PHOSPHOR SAVER
SIGNAL SWITCHING
92
OPTION
– SETTING MODE –
INACTIVE
INACTIVE
DISABLE
OFF
SOUND
MUTE ON
PICTURE
MUTE ON
Advertisement
Table of Contents
