[Factory Default]; ❽ Menu Descriptions & Functions [Usb-A] - NEC PE506WL User Manual

Expand
Language
Auto setup
Keystone
Security
Power management
Filter
Test pattern
Network setup
Control ID
Factory default

[Factory default]

This function resets all your settings to factory default.
1) Press button to select [Factory default] menu.
2) Press the ENTER or
3) Press button to select "Yes", then press the ENTER button.
Return to factory default?
Yes
： Move
ENTER
❽ Menu Descriptions & Functions [USB-A]
The projector has expand function, you can select other functions as described below.
When the USB memory inset into the projector, the USB-A function can project pictures stored in the USB
memory.
Press the MENU button on the remote control to display the On-Screen menu. Press the
USB-A menu, then press the ENTER or
1) Press button to select required item.
2) Press the ENTER button.
3) Press button to set options.
4) Press the ENTER button.
NOTE:
• When selecting [USB-A] as input signal, the "USB-A" menu is available.
• In addition to "Set slide" menu, even change the settings, If you do not implement the [Apply], the setting value of the change is invalid.
. . .
button.
No
： Select ： Back
EXIT
button.
Expand
Control ID
Control ID
Control ID Number
57
5. Using On-Screen Menu
Off
1
button to select the