NEC MultiSync XG85RP-CH Setup Manual page 111

5 Use INPUT buttons to enter the year, month, day, hour, minute,
and second and press ENTER.
• Pressing the END button will turn off the "DATE, TIME
PRESET" screen and the screen will return to the "MENU
MODE" menu.
• If you made an error in entering data, press the END button to
return to the "MENU MODE" menu, then start again.
• The time input format varies depending on the setting previ-
ously explained.
6 To end this mode, press END.
• Whenever the END button is pressed, the menus will sequence
in this order:
"OPTION" menu "ADJUST" menu
• If the "RETURN USER MODE?" menu appears, use the
CURSOR or button to select either "YES" or "NO" and
press ENTER. This will exit the ADJUST mode.
Items to select
• YES ......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
NOTE: The projector has a built-in clock. The clock will keep
working for about three days after the main power is turned off.
If the main power is not supplied to the projector for three days
or more, the built-in clock may reset. If the built-in clock resets,
set the date and time again. The built-in clock will not reset
while in the standby condition.
Source screen
111
D A T E , T I M E P R E S E T
D A T E ( M M / D D / Y Y )
_ _ / _ _ / _ _ ( M O N )
T I M E ( H H : M M : S S )
_ _ : _ _ : _ _
R E T U R N US E R MO D E ?
Y E S N O
SETTING