NEC MultiSync XG85RP-CH Setup Manual page 25

When using with a single Switcher ISS-6020/ISS-6020G:
Use the CURSOR or button to select the input slot number
of the Switcher and press ENTER.
• Input slot numbers are from 1 through 10.
Use the CURSOR or
"S-VIDEO" or "COMPO." and press ENTER.
• The "NAME INPUT" screen will be displayed.
Items to select
• VIDEO --------- Selects the signal from the VIDEO input
terminal of the VIDEO input board.
• RGB ----------- Selects the signal from the RGB input terminal
of the RGB input board.
• S-VIDEO ------ Selects the signal from the S-VIDEO input
terminal of the VIDEO input board.
• COMPO. ------ Selects the signal as COMPONENT signal from
the RGB input terminal of the RGB input board.
* Go on to Step 2).
NOTE: Signal registry is not possible unless the installed input
board matches the selected signal. Check the installed input
board and the slot number.
button to select "VIDEO", "RGB",
25
SIGNAL ENTRY
M A S T E R
S L O T – 0 1
S L O T – 0 2
S L O T – 0 3
S L O T – 0 4
S L O T – 0 5
S L O T – 0 6
S L O T – 0 7
S L O T – 0 8
S L O T – 0 9
S L O T – 1 0
V I D E O
R G B
S - V I D E O
C O M P O .