Bright Uniformity Adjustment - NEC MultiSync XG85RP-CH Setup Manual

REFERENCE ADJUSTMENT

Bright Uniformity Adjustment

This feature allows you to equalize the brightness between the center
and the edge.
Before adjustment:
• Select the "ALL WHITE" pattern using the TEST button on the full
function remote control.
Proceed as follows:
1 Press and hold the CTL button then press the ADJUST button to
display the "REF. ADJUST" menu.
• The projector may ask you to enter your passcode.
• See page 68 for the explanation of the PASSCODE.
2 Use the CURSOR
or
UNIFORM." item. Press the ENTER or INPUT "2" button to
display the "BRIGHT UNIFORMITY" adjustment screen.
3 Use the CURSOR buttons to adjust the right, left, top, or bottom
edge.
• Press CURSOR or
brightness on the right and the left side.
Press CURSOR or
brightness on the top and the bottom side.
4 To end this mode, press the END button.
• Whenever the END button is pressed, the menus will sequence
in this order:
"REF. ADJUST" menu Source screen
• If the "RETURN USER MODE?" menu appears, use the
CURSOR or button to select either "YES" or "NO" and
then press ENTER. This will exit the REF. ADJUST mode.
Items to select
• YES .......... When you try to enter the ADJUST mode the next
time, you will need to re-enter your passcode.
• NO ........... When you try to enter the ADJUST mode the next
time, you will not need to re-enter your passcode.
button to highlight the "2/BRIGHT
button to increase or decrease the
button to increase or decrease the
– R E F . A D J U S T –
1 / A S T I G
2 / B R I G H T U N I F O R M .
3 / W H I T E U N I F O R M .
4 / R A S T E R C E N T E R I N G
5 / F O C U S B A L .
6 / R E F . W H I T E B A L
BRIGHT UNIFORMITY
H
V
132
BR
RETU RN USE R MO DE?
Y E S N O
6 0 %
6 0 %