Table of Contents
Advertisement
Registering Passcode
When the projector is shipped from the factory, no passcode is
registered. If you want to use the passcode option, you must register
a passcode.
To register a new passcode, proceed as follows:
1 Press the ADJUST button.
• The "ADJUST" menu will be displayed.
2 Use the CURSOR
or
PASSCODE" line. Press ENTER to display the "PASSCODE"
menu. You can also select the "PASSCODE" menu directly by
pressing the INPUT "7" button.
3 Use the CURSOR
or
ENTER to display the "NEW PASSCODE?" menu. You can also
select the "NEW PASSCODE?" menu directly by pressing the
INPUT "1" button.
4 Enter a four digit passcode using the "1" through "0" buttons.
1) Each time you press the INPUT button, an asterisk will
appear under the "NEW PASSCODE?" message.
NOTE: "0000" and "9999" cannot be used as a passcode.
2) Once you have finished entering your four digit passcode,
press ENTER to store the code.
NOTE: If you have made an error, press the NORMAL button to
delete the asterisk " ". Then re-enter the correct passcode.
To delete all the entered digits, hold down the CTL button then
press the NORMAL button.
3) If the passcode has been entered correctly, the "CONFIRM
NEW PASSCODE?" menu will be displayed.
NOTE: If the passcode is not entered correctly, the "WARNING
PASSCODE!!" message will be displayed. You will be required
to enter the passcode correctly.
button to highlight the "7/
button to select "ENTRY". Press
– A D J U S T –
1 / S I G N A L E N T R Y
2 / F O C U S
3 / A L I G N M E N T
4 / C O N V E R G E N C E
5 / K E L V I N
6 / R , G , B G A I N
7 / P A S S C O D E
8 / O P T I O N
9 / R E F . A D J U S T
– P A S S C O D E –
1 / E N T R Y
2 / D I S A B L E
69
PASSCODE
N E W P A S S C O D E ?
– – – –
Advertisement
Table of Contents
