NEC MultiSync XG85RP-CH Setup Manual page 117

When using with two or more ISS-6020/ISS-6020G Switchers:
1) Use the CURSOR or
ENTER.
• The "MASTER" and "SLAVE" menu will be displayed.
2) Use the CURSOR or
number of the master Switcher from the "MASTER" menu
and press ENTER.
3) Use the CURSOR or
number of the slave Switcher from the "SLAVE" menu and
press ENTER.
• The "TIME" input screen will be displayed.
4) Enter the starting time using INPUT buttons and press
ENTER.
• Type the time in hours (24 hours), minutes, and seconds.
• If you have made an error in the input of numbers, press the
END button to return to the "SLAVE" menu then start from
step 2).
• The "WEEK SELECT" screen will appear.
5) Use the CURSOR or
week, then select either "YES" or "NO" with ENTER.
• When "DAILY" selected, the entire week is changed to
"YES".
• When "END" is selected, the current setting is saved.
• To return to Step 4), press the END button. In that case, the
changed setting is invalid.
NOTE: Typing 99:99:99 in the time input menu will execute the
program immediately. (See the example in the following "WAIT"
section.)
button to select "INPUT" and press
button to select the input slot
button to select the input slot
button to select any day of the
117
I N P U T
W A I T
G O T O
L O O P
P - O N
P - O F F
I N S E R T
D E L E T E
M A S T E R
S L O T – 0 1
S L O T – 0 2
S L O T – 0 3
S L O T – 0 4
S L O T – 0 5
S L O T – 0 6
S L O T – 0 7
S L O T – 0 8
S L O T – 0 9
S L O T – 1 0
M A S T E R S L A V E
S L O T – 0 1 S L O T – 0 1
S L O T – 0 2 S L O T – 0 2
S L O T – 0 3 S L O T – 0 3
S L O T – 0 4 S L O T – 0 4
S L O T – 0 5 S L O T – 0 5
S L O T – 0 6 S L O T – 0 6
S L O T – 0 7 S L O T – 0 7
S L O T – 0 8 S L O T – 0 8
S L O T – 0 9 S L O T – 0 9
S L O T – 1 0 S L O T – 1 0
T I M E _ _ : _ _ : _ _
W E E K S E L E C T
D A I L Y
S U N N O
M O N Y E S
T U E Y E S
W E N Y E S
T H U Y E S
F R I Y E S
S A T N O
E N D
SETTING