NEC MultiSync XG85RP-CH Setup Manual page 140

MASSAGE LIST
The following messages are displayed at the bottom portion of the screen.
Message
*CAN NOT CHANGE!!
*CAN NOT CUT OFF CRT*
*CAN NOT MAKE ENTRY*
*CAN NOT LOAD (NO ENTRY)*
*CAN NOT SELECT*
*CAN NOT STORE (NO ENTRY)*
*CHANGE PASSCODE COMPLETE!!*
*D-CONV BUSY*
*D-CONV COMMUNICATION ERROR*
*D-CONV CPU NOT READY*
*DELETING*
*ENTRY COPY END*
*ENTRY LIST IS FULL !*
*ENTRY MOVE END*
* EXTERNAL CONTROL EXECUTING*
*EXTERNAL CONTROL PICTURE MUTE ON*
*EXTERNAL CONTROL SOUND MUTE ON*
*FOR SERVICE PERSONNEL ONLY*
*GAIN DATA COPY END*
*INPUT B (or C) IS NOT AVAILABLE*
Conditions
TEST button is depressed at the time of
the POSITION-SHIFT adjustment.
R, G, B button is depressed at the time
of the BRIGHT, WHITE-BAL, COLOR
TEMP., COLOR SHIFT, and BASE
WHITE adjustments.
Error during signal registration
LOAD is not possible due to input
signal not being registered.
Attempt to select an item that cannot
be selected
STORE is not possible due to input
signal not being registered.
Passcode change completed
The D-CONV PWB is engaged in
computational processing.
D-CONV PWB communication error
D-CONV PWB communication error
Signal is being deleting from INPUT
LIST.
ENTRY COPY completed
There is no space for signals No. 51
and later in Input List when "NEW" is
selected from "STORE?" menu.
ENTRY MOVE completed
Signal selection from INPUT LIST while
in the external control mode
Depress the R, G, B button or execute
PICTURE FUNCTION adjustment items
during the PICTURE MUTE setting in
the external control mode
Execute the SOUND FUNCTION
adjustment items during the PICTURE
MUTE setting in the external control
mode
Function for service personnel.
GAIN DATA COPY completed
No optional board is installed in INPUT
B (or C) slot.
140
Countermeasures
Changes to the TEST PATTERN are not
possible at the time of the POSITION-
SHIFT adjustment.
The CRT cannot be cut off at the time of
the BRIGHT, WHITE-BAL, COLOR
TEMP., COLOR SHIFT, and BASE
WHITE adjustments.
Register again, or check the input
signal.
New registration of signal
There is an unselectable item due to the
input signal or the connection condition
of the peripheral equipment.
New registration of signal
-
*
*
*
-
-
Make an entry in SIGNAL ENTRY or
delete signals for No. 51 or later from
Input List to create space.
-
Operation by external control
Cancel PICTURE MUTE by external
control
Cancel SOUND MUTE by external
control
Not adjustable by the end user.
-
Check the slot.