Making Differential Oe Measurements (Applies To 4-Port Pna Only) - Keysight N4372E User Manual

Making differential OE measurements (applies to 4-port PNA only)

Keysight N4372E Lightwave Component Analyzer User's Guide
1 Connect your device under test.
2 When the following message is displayed, select "Single" or
"Continuous" to start the first measurement:
3 To make further measurements with these settings, press click
or to start the measurement.
For information on further parameters, refer to
page 77.
Making Measurements
User Interface Reference
4
on
63