ABB AX416 User Manual page 7

Single and Dual Input Analyzers for pH/Redox (ORP)
AX416, AX436, AX460, AX466 & AX468
Use the Menu Key
to scroll through
the Menus
Section 5.5, Page 34
CONFIG.ALARMS Config. Alarm 1
A1: Type
A1: Assign
Use the Downscroll
A1: Failsafe
Key to scroll through
the Frames
A1: Action
within each Page
A1: Setpoint
A1: Hysteresis
A1: Delay
Section 5.6, Page 38
CONFIG.OUTPUTS Config. Output 1
AO1: Assign
AO1: Range
AO1: Span Value
AO1: Zero Value
AO1: Default
AO1: Default Val
Section 5.7, Page 40
CONFIG.CLOCK Set Clock?
Format
Date
Time
Press To Set
Displayed only if option board fitted and serial communications feature enabled (Section 7.3) –
CONFIG.SERIAL
see Supplementary Manual PROFIBUS Datalink Description (IM/PROBUS)
CONFIG. CONTROL
Single Input Analyzer Only — see Supplementary Manual PID Control (IM/AX4PID)
Section 5.8, Page 41
CONFIG.SECURITY Alter Sec.Code
Alter Cal.Code
Section 5.9, Page 41
CONFIG.LOGBOOK
Section 5.10, Page 42
Test Outputs
TEST/MAINTENANCE
Test Output 1
Test Output 2
Test Output 3
Test Output 4
To
FACTORY SETTINGS
(see Section 7.3, Page 57)
Fig. 2.4 Overall Programming Chart
IM/AX4PH Issue 9
Use the Sidescroll Key to scroll through the Pages within each Menu
Config. Alarm 2
A2: Type
A2: Assign
A2: Failsafe
A2: Action
A2: Setpoint
A2: Hysteresis
A2: Delay
Config. Output 2
AO2: Assign
AO2: Range
AO2: Span Value
AO2: Zero Value
AO2: Default
AO2: Default Val
dd/mm/yy
01:01:02
12:00
Press To Abort
Logbook
Maintenance
Hold Outputs
Automatic Time
Press
Config. Alarm 3
A3: Type
A3: Assign
*
A3: Failsafe Wash Mode
Wash Frequency
A3: Action
Wash Duration
A3: Setpoint
Recovery Period
A3: Hysteresis
A3: Delay
*
Applicable only
to Alarm 3
Config. Output 3 Config. Output 4
AO3: Assign AO4: Assign
AO3: Range AO4: Range
AO3: Span Value AO4: Span Value
AO3: Zero Value AO4: Zero Value
AO3: Default AO4: Default
AO3: Default Val AO4: Default Val
Key
Load/Save Config
Factory Config.
User Config.
To Set Press To Abort
2 OPERATION
Config. Alarm 4 Config. Alarm 5
A4: Type A5: Type
A4: Assign A5: Assign
A4: Failsafe A5: Failsafe
A4: Action A5: Action
A4: Setpoint A5: Setpoint
A4: Hysteresis A5: Hysteresis
A4: Delay A5: Delay
Available only if option board fitted and
analog features enabled – see Section 7.3
5