Jumper Description for DMC-1600
JUMPER
LABEL
JP20
SMX
SMY
SMZ
SMW
SM E
SM F
SM G
SM H
OPT
JP21
MRST
188 • Appendices
FUNCTION (IF JUMPERED)
For each axis, the SM jumper selects the SM
magnitude mode for servo motors or selects
stepper motors. If you are using stepper
motors, SM must always be jumpered. The Analog motor command is not valid with SM
jumpered.
Reserved
Master Reset enable. Returns controller to factory default settings and erases EEPROM.
Requires power-on or RESET to be activated.
DMC-1600