Note For Interfacing To External I/O Racks - Galil Motion Control DMC-1600 Series User Manual

96.
98.
100.

Note for Interfacing to External I/O Racks

The extended I/O connector can be made compatible with external I/O mounting racks such as
Grayhill 70GRCM32-HL and OPTO-22 G4PB24 by using the CB-50-80 and a 80 pin high density
cable. By connecting the CB-50-80, the user will be provided with 2 50pin IDC connectors which
are directly compatible with specific I/O mounting racks. When using the OPTO-22 G4PB24 I/O
mounting rack, the user will only have access to 48 of the 64 I/O points available on the controller.
Block 5 and Block 9 must be configured as inputs and will be grounded by the I/O rack.
DMC-1600
GND - -
GND - -
GND - -
-
-
-
Appendices • 187