Service and troubleshooting
October 2022
7.2
Diagnostic messages
7.2.1
Device hardware fault
Alarm classification
Event
Device status
Class
Possible cause
An electronics error has occurred.
Recommended actions
Related information
Perform a device reset
7.2.2
Device software fault
Alarm classification
Event
Device status
Class
Possible cause
The software has detected an internal error.
Recommended actions
Related information
Perform a device reset
Restore to factory settings
44
Device hardware fault – Device exchange
Failure
Error
1. Restart the device.
2. If the condition persists, replace the device.
Device software fault – Check firmware revision
Failure
Error
1. Restart the device.
2. Restore default settings and reconfigure the device.
3. If the condition persists, replace the device.
Reference Manual
00809-0100-7062
Rosemount 1208A Level and Flow Transmitter