Graco QUANTM i30 Instructions Manual page 8

Configuration Matrix
Seat Material
AC Acetal
AL Aluminum
BN* Buna-N
FK* Fluoroelastomer
GE Geolast
PP Polypropylene
PV PVDF
SA 17-4PH Stainless Steel
with PTFE seals
SP Santoprene
SS 316 Stainless Steel
TP* TPE
* Models with BN, FK, or TP seats do not use manifold seals.
Connection
A1 Aluminum, standard ports, NPT
A2 Aluminum, standard ports, BSP
C1 Conductive Polypropylene, center flange
C2 Conductive Polypropylene, end flange
F1 PVDF, center flange
F2 PVDF, end flange
I2 Iron, standard ports, BSP
P1 Polypropylene, center flange
P2 Polypropylene, end flange
S1 Stainless Steel, standard ports, NPT
S2 Stainless Steel, standard ports, BSP
S51 Stainless Steel, center flange, horizontal outlet
8
Check Material
AC Acetal, ball BN Buna-N
BN Buna-N, ball CO Polychloroprene
CR Polychloroprene, FK
standard, ball
CW Polychloroprene, GE Geolast
weighted, ball
FK Fluoroelastomer, PO PTFE/EPDM Overmold
ball
GE Geolast, ball PS
PT PTFE, ball SP
SD 440C Stainless TP
Steel, ball
SP Santoprene, ball
SS 316 Stainless
Steel, ball
TP TPE, ball
Diaphragm Material
Overmold
Fluoroelastomer
PTFE/Santoprene,
two-piece
Santoprene
TPE
Options
00 Standard
Manifold Seal Material
-- None
PT PTFE
3A8572B