Table of Contents
Advertisement
Technical Specifications
Technical Specifications for i80 (QTD) Models
QUANTM i80 (QTD) Pumps
Maximum fluid working pressure
Maximum free-flow delivery
Maximum size pumpable solids
Environmental temperature range
Maximum operating altitude
Electrical ratings
i80 (QTD) models, FC1 motor
i80 (QTD) models, FC2 motor
i80 (QTD) models, FC3 motor
i80 (QTD) models, FC4 motor
Materials of construction
See Configuration Matrix, starting on page 7, for materials of construction for your equipment model.
Fluid inlet/outlet sizes
Models with wetted section materials coded:
Maximum suction lift*
Noise (dBa)
Maximum sound pressure
Sound pressure measured 1.6 feet (0.5 meter) from equipment.
Sound power measured per ISO-9614-2.
Weight
Models with wetted section materials coded:
Notes
*
May vary based on pump materials, suction condition, discharge head, pressure, and fluid type.
All trademarks or registered trademarks are the property of their respective owners.
52
US
100 psi
80 gpm
0.19 in.
-4° to 104°F
9842 ft
Rated Voltage
200–240 V
200–240 V
200–240 V
200–240 V
AL, SS
CP, PP, PV
Wet 18.0 ft
Dry 19.3 ft
AL 71 lb
SS 112 lb
CP, PP 75 lb
PV 85 lb
Metric
6.89 bar, 0.69 MPa
227 lpm
4.8 mm
–20° to 40°C
3000 m
Phase
Hertz
3
50/60 Hz
1
50/60 Hz
3
50/60 Hz
1
50/60 Hz
1.5 in. npt(f) or 1.5 in. bspt
1.5 in. ANSI/DIN Raised Face Flange
5.48 m
5.9 m
72 dBa at full power and full flow
32.2 kg
50.8 kg
34.0 kg
38.5 kg
Current
7.5 A
15 A
7.5 A
15 A
3A8572B
Advertisement
Table of Contents
