Default Settings - Emerson Rosemount Analytical FCLi Instruction Manual

MODEL FCLi
TABLE 5-1. DEFAULT SETTINGS
1. SENSOR-OUTPUT ASSIGNMENTS
Model
FCLi-01
FCLi-02
2. OTHER OUTPUT SETTINGS
Output Dampening
1
2
3. OUTPUT RANGES
Measurement
free chlorine - ppm
pH
Temperature
4. ALARM CONFIGURATION AND SETPOINTS
Assigned to
High or low
Deadband
Setpoint (ppm)
Setpoint (pH)
Note: For single sensor input, alarm 2 is assigned to sensor 1, and is configured as a low alarm.
16
Output 1
chlorine
chlorine (sensor 1)
0 or 4 mA
off 4
off 4
Range
0 to 20 ppm
0 to 14
0 to 100°C
1
Sensor 1 (chlorine)
High
0
0 ppm (low); 20 ppm (high)
14 (high); 0 (low)
Output 2
temperature
pH (sensor 2)
Mode Section
Linear
Linear
Section
5.3
5.3
5.3
Alarm
2
Sensor 2 (pH/ORP) (note)
High (note)
0
0 ppm (low); 20 ppm (high)
14 (high); 0 (low)
PROGRAMMING THE ANALYZER
Section
5.3 and 5.9
5.3 and 5.9
5.3
5.3
Section
3
Fault 5.4
NA 5.4
NA 5.4
NA 5.4
NA 5.4
SECTION 5.0