Server Installation Process; Part A: Connecting The Faxfinder To Power Outlet And Ethernet; Connect Faxfinder To Ac Outlet; Verify Powering - Multitech FaxFinder FF200 Quick Start Manual

Server Installation

Server Installation Process

Part A: Connecting the FaxFinder to Power Outlet and
Ethernet
Summary: Place the FaxFinder in a convenient location. Then
connect it to your AC power outlet, POTS lines or PBX station
ports, and Ethernet.

1. Connect FaxFinder to AC Outlet.

Plug the DC power transformer into a power outlet or power
strip. Secure the other end to the PWR jack on your FaxFinder.
The DC power transformer is included with your FaxFinder.
Caution: Use only the DC power transformer supplied with
the FaxFinder. Use of any other transformer voids the
warranty and can damage the FaxFinder.

2.Verify powering.

After power is applied, there is a 4-second delay before the
Power LED comes on. In normal operation, the Power LED will
be flashing.
When you apply power, the FaxFinder performs a diagnostic
self-test. The PWR indicator flashes when the test is complete
and the unit is ready. If this does not happen, check that the
power supply is solidly connected and that the AC outlet is live.
Multi-Tech FaxFinder Quick Start
11