Multitech FaxFinder FF200 Quick Start Manual page 25

Multi-Tech FaxFinder Quick Start
d. At this point the Administrator should receive an email from
your FaxFinder saying that the mail server address has
been updated.
e. Email Server Authentication Parameters. If your email
server requires authentication in order to give the FaxFinder
access, fill in the lower three fields (Server User ID,
Password, Retype Password). If you can enter the
network email program and send messages without
entering a User ID and Password, then you must leave
these fields blank.
However, if your network email program does require a
User ID and Password in order to send email messages,
you must fill in these three fields. If authentication is
required and these fields are left blank, then the error
"SMTP Authentication Error" will appear on the Current
Status screen in the "Email Status" field. If authentication
is not required and these fields are filled in, then an error
will also occur. You must know how your email server
works in this regard and complete the Administration:
SMTP Configuration screen accordingly.
f. If you do not receive an email saying that the mail server
address has been updated, see item #2 "What if I don't get
an email when I set the mail server address?" in the
Troubleshooting section of the Administrator User Guide.
Server Installation
25