Client Operation; Sending A Fax - Multitech FaxFinder FF200 Quick Start Manual

Multi-Tech FaxFinder Quick Start

Client Operation

Sending a Fax

To send a fax by printing from an application program on a client
PC, follow the steps listed below.
1. The client PC and the FaxFinder server must both be
connected to the same Ethernet LAN system. (See the
section "Part B: Configuring the FaxFinder Server" earlier in
this manual.)
2. The FaxFinder client software must be installed on the PC.
(See the section "Installing FaxFinder Client Software"
earlier in this manual.)
3. After installation, the FaxFinder Fax Client Software
program will be running whenever the PC is on. You can
view the FaxFinder client program's main window by
clicking on the FaxFinder icon at the lower right of the PC's
monitor screen in its Application Tray. Then select "Show
FaxFinder Client Software." (Note: The user can shut down
the FaxFinder program by selecting "exit" either from the
tray icon or from the main FaxFinder program screen. If the
program has been shut down, it can be restarted from the
Windows Start menu.)
Client Operation
57