Setting Admin Pc To Startup Ip Address - Multitech FaxFinder FF200 Quick Start Manual

Server Installation

1. Setting Admin PC to Startup IP Address

a. Connect a pc to your network.
b. Set the pc IP address to 192.168.2.x subnet (using any
address excluding 192.168.2.1).
Windows XP
a. From the Windows
desktop, right-click on "My
Network Places," and select
"Properties."
b. In the Network
Connection screen, right-
click on "Local Area
Connection."
c. In the Local Area
Connection Properties
screen, on the "General" tab,
scroll to the "Internet Protocol
(TCP/IP)" entry and select it.
Click "Properties."
d. In the Internet Protocol
(TCP/IP) Properties screen,
record the existing IP
address. Then reset the IP
address to 192.168.2.2.
Multi-Tech FaxFinder Quick Start
Windows 2000
a. From the Windows
desktop, right-click on "My
Network Places," and select
"Properties."
b. In the Network and
Dialup Connections
screen, right-click on "Local
Area Connection" and select
"Properties."
c. In the Local Area
Connection Properties
screen, select the "Internet
Protocol (TCP/IP)" entry.
Click "Properties."
d. In the Internet Protocol
(TCP/IP) Properties screen,
record the existing IP
address. Then reset the IP
address to 192.168.2.2.
16