Setting Faxfinder Ip Addresses; Resetting Admin Pc To Its Regular Ip Address; Logging In (Ii) - Multitech FaxFinder FF200 Quick Start Manual

Server Installation

3. Setting FaxFinder IP Addresses

a. In the FaxFinder Administration screen, go to the IP
Configuration fields.
Administration: IP Configuration
192.168.4.89
IP Address
255.255.255.0
Subnet Mask
192.168.11.251
Name Server
update
b. Fill in the IP information that applies to your FF200
FaxFinder Server unit. The fields for "IP Address," "Subnet
Mask," "Default Gateway" and "Name Server" are required.
A "Secondary Name Server" may be considered optional.
c. Click Update. After the Update button has been clicked, it
takes 5 seconds for the FF200 to update the addresses.

4. Resetting Admin PC to Its Regular IP Address

In step #1 above, you recorded the original IP address of the
administrator's PC and then reset it to the IP address required to
allow communication with the FaxFinder unit. You may now set
the IP address of the administrator's PC back to its original value
or to any other value that will allow you to communicate with the
FaxFinder at its new IP address.

5. Logging In (II)

Having reset the IP address of the administrator's PC, you must
log into the FaxFinder Server software again. Enter the
FaxFinder's new IP address into your browser. The Login
Multi-Tech FaxFinder Quick Start
Default Gateway 192.168.4.1
Secondary
Name Server
18